Description
This USB 3.1 external hard drive enclosure offers a rugged, high-performance solution for accessing and backing up your important files, while protecting your drive in harsh environments. It comes with two cables, to support both USB-C and USB-A enabled laptops and tablets.
-
Maximize the performance of your 2.5" SATA drives
The drive enclosure delivers USB 3.1 Gen 2 performance with data transfer speeds of up to 10 Gbps, letting you leverage the high performance of the latest drives while alleviating bottlenecks in your data transfers. With support for SATA I, II, and III, and high-capacity drives, this USB-C enclosure is compatible with virtually any 2.5" SATA SSD or HDD. -
IP65 rated for water and dust resistance
Be prepared for the unexpected when you're out in the field, in outdoor or industrial environments. The rugged hard drive enclosure provides superior water and dust resistance with an IP65 rating, to keep your data safe and secure, even in sudden downpours or dust storms. -
Military-rated protection
The rugged enclosure is military rated to protect your drive against environmental hazards such as drops, shock and vibration. The tough-wearing exterior casing provides shock resistance, while the flexible silicone sleeve provides extra protection, absorbing the impact of bumps, rough baggage handling or drops. Inside, an extra layer of silicone provides drive stability.
Specifications
Summary
- Product Description
- StarTech.com 2.5" SATA SSD/HDD Hard Drive Enclosure - USB 3.1 (10Gbps) External Hard Drive Case - IP65-Rated Enclosure (S251BRU31C3) - storage enclosure - SATA 6Gb/s - SATA 6Gb/s, USB 3.1 (Gen 2)
- Device Type
- Storage enclosure - external
- Bus Type
- SATA 6Gb/s, USB 3.1 (Gen 2)
- Colour
- Black
- Expansion Bays
- 1 x internal - 2.5"
- Hard Drive Form Factor Compatibility
- 2.5"
- Interface
- SATA 6Gb/s
- Data Transfer Rate
- 6 Gbit/s
- Supported Devices
- Hard drive, solid state drive
- Max Storage Devices Qty
- 1
- Power Source
- USB bus
- Dimensions (WxDxH)
- 11.2 cm x 14.6 cm x 3 cm
- Weight
- 200 g
- Manufacturer Warranty
- 2-year warranty
Detailed Specification
General
- Device Type
- Storage enclosure - external
- Hard Drive Form Factor Compatibility
- 2.5"
- Hard Drive Maximum Height
- 9.5 mm
- Host Bus
- SATA 6Gb/s, USB 3.1 (Gen 2)
- Colour
- Black
Storage Controller
- Interface
- SATA 6Gb/s
- Data Transfer Rate
- 6 Gbit/s
- Supported Devices
- Hard drive, solid state drive
- Max Storage Devices Qty
- 1
- Processor
- ASMedia ASM235CM
Expansion / Connectivity
- Bays
- 1 x internal - 2.5"
- Interfaces
- 1 x SATA 6Gb/s - SATA combo
- Connections
- 1 x USB 3.1 (Gen 2) - 24 pin USB-C
Miscellaneous
- Cables Included
- 1 x USB-C to USB-A cable - external , 1 x USB-C cable - external
- Features
- USB powered, rugged, tested with up to 2TB 7200 RPM 2.5" hard drives, S.M.A.R.T. support, TRIM support
- MTBF
- 48000 hours
- Compliant Standards
- FCC, RoHS, MIL-STD 810G, WEEE, UASP (USB Attached SCSI Protocol)
Power
- Power Source
- USB bus
Manufacturer Warranty
- Service & Support
- Limited warranty - 2 years
Dimensions & Weight
- Width
- 11.2 cm
- Depth
- 14.6 cm
- Height
- 3 cm
- Weight
- 200 g
Environmental Parameters
- Min Operating Temperature
- -40 °C
- Max Operating Temperature
- 85 °C
- Humidity Range Operating
- 20 - 95%
Bundle deals
 |
StarTech.com Rugged Hard Drive Enclosure | In Stock | £32.86 |
 |
StarTech.com USB 3.1 Enclosure for 2.5" SSD | In Stock | £26.90 |
 |
StarTech.com 1m USB 3.1 USB-C to USB-A Cbl | In Stock | £10.18 |
 |
StarTech.com 1m 3ft USB 3.1 USB-C Cable M/M | In Stock | £14.29 |
 |
StarTech.com M.2 SATA Enclosure with USB-C | In Stock | £26.26 |
 |
StarTech.com Dual M.2 Enclosure - RAID | In Stock | £43.59 |
 |
StarTech.com 1m USB 3.1 C Cable w/ PD (5A) | In Stock | £25.23 |
 |
StarTech.com 0.5m USB C Cable - USB 3.1 | In Stock | £14.70 |
 |
StarTech.com 0.5m USB to USB-C Cable 10Gbps | In Stock | £9.39 |
 |
StarTech.com StarTech.com Biometric Enclosure USB 3.0 to 2.5" SATA | In Stock | £50.65 |
