Description
HyperX HX424C12SB2K2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2400 CL12 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 8GB. Each module supports IntelĀ® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2400 at a low latency timing of 12-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
-
Low latency for exceptional DDR4 performance
HyperX Savage DDR4 is a superior combination of fast speeds and aggressive timings with latencies of CL12 - CL15. -
Lower power consumption compared to DDR3
HyperX Savage DDR4 memory has lower power consumption than DDR3, with 1.2 V or 1.35 V only for all parts. Its lower power requirement results in less heat, higher reliability and a cooler and quieter PC. -
Die-cast aluminum low-profile heat spreader
Made from high-quality die-cast aluminum, HyperX Savage DDR4 provides enhancedthermal dissipation for greater reliability. Its low profile helps avoid clearance issues with CPU coolers, and its asymmetrical design and diamond-cut finish stand out in the crowd.
Specifications
Summary
- Product Description
- HyperX Savage - DDR4 - kit - 8 GB: 2 x 4 GB - DIMM 288-pin - 2400 MHz / PC4-19200 - unbuffered
- Product Type
- Memory kit
- Capacity
- 8 GB: 2 x 4 GB
- Memory Type
- DDR4 SDRAM - DIMM 288-pin
- Upgrade Type
- Generic
- Data Integrity Check
- Non-ECC
- Speed
- 2400 MHz (PC4-19200)
- Latency Timings
- CL12 (12-14-14)
- Features
- Single rank, black heatsink, aluminium heat spreader, On-Die Termination (ODT), Intel Extreme Memory Profiles (XMP), Black PCB, low profile heatspreader, sixteen banks, asymmetrical heatspreader, unbuffered
- Voltage
- 1.35 V
- Lead Plating
- Gold
- Manufacturer Warranty
- Limited lifetime warranty (Russia - 10 years)
Detailed Specification
General
- Capacity
- 8 GB: 2 x 4 GB
- Upgrade Type
- Generic
Memory
- Type
- DRAM memory kit
- Technology
- DDR4 SDRAM
- Form Factor
- DIMM 288-pin
- Module Height (inch)
- 1.36
- Speed
- 2400 MHz (PC4-19200)
- Latency Timings
- CL12 (12-14-14)
- Data Integrity Check
- Non-ECC
- Features
- Single rank, black heatsink, aluminium heat spreader, On-Die Termination (ODT), Intel Extreme Memory Profiles (XMP), Black PCB, low profile heatspreader, sixteen banks, asymmetrical heatspreader, unbuffered
- Module Configuration
- 512 x 64
- Chips Organization
- 512 x 8
- Voltage
- 1.35 V
- Lead Plating
- Gold
- RAM Performance
- SPD - 2133 MHz - 1.2 V - CL15 - 15-15-15 , Intel Extreme Memory Profiles (XMP) - 2133 MHz - 1.2 V - CL13 - 13-13-13 , Intel Extreme Memory Profiles (XMP) - 2400 MHz - 1.35 V - CL12 - 12-14-14
Miscellaneous
- Colour Category
- Black
Manufacturer Warranty
- Service & Support
- Limited lifetime warranty (Russia - 10 years)