Description

• Maximum 2500 lumens brightness with high, standard and low modes

  The VPL-SW525 features three brightness modes for different use - 'High' for naturally white presentations in bright rooms, 'Standard' for everyday use and 'Low' for video in darkened rooms.

• 3LCD BrightEra technology

  Sony's 0.75 inch BrightEra inorganic TFT 3-LCD panels deliver improved panel light resistance, higher resolution, high brightness and increased panel reliability.

• WXGA widescreen resolution

  The VPL-SW525 has a color light output of 2500 ANSI lumens and with a native WXGA (1280 x 800) widescreen resolution panel - perfect for video or presentations direct from a laptop or PC.

• 6000 hours lamp life

  The new driving scheme reduces gap expansion and brightness gradation. A new cooling system allows for uniformity in the temperature of the glass bulb, preventing the glass from clouding.

• Eco mode key

  Users can easily select power-saving Eco Modes. The most energy-efficient mode is accessible through a single button-push, and further adjustments are available through a user-friendly menu system.

• ECO lamp dimming

  This projector (if the function is set to on) can reduce power consumption and brightness by 10~15% without user detection during a input image. After a pre-set time, the brightness and power consumption will reduce to 30%.

• ECO picture mute - (Instant off / Instant On)

  Picture Mute reduces power consumption down to 30% power usage, saving both cost and lamp hours. This feature can be used in the education market as instant off / instant on in-between class changes avoiding the need to power off completely and then turn back on - which increases power consumption and is less time consuming.

• Digital / HD ready

  HMDI input means the VPL-SW535 can accept High Definition digital signals from PC or Video source.

• Automatic keystone adjustment

  The projector can detect keystone distortion and correct it automatically. (Note that since this is an electronic correction, it may reduce the picture quality slightly).

• Smart APA (Auto Pixel Alignment)

  When a computer is used as a picture source, APA automatically optimizes Phase, Pitch and Shift values. These can also be adjusted manually.

• Auto input search

  Auto Input Search detects which input has an incoming signal, and automatically switches to it. This makes it easier for users to set up the projector prior to making a presentation.

• Picture muting / audio muting

  If there is a need to blackout the image or turn off the audio from the projector, all it takes is a single button-press on the remote control. One button will mute audio and image at the same time. There is also a separate "mute audio" button for audio-only muting.

• Six picture modes

  The VPL-SW535 has six available picture modes for correct picture quality; Dynamic, Standard, Game, Living, Cinema, and Presentation. Six picture mode and 3 brightness mode combined, the user can select most suitable picture / brightness mode according to the picture source and environment for perfect image.

• Audio switcher facility

  To avoid the need for a separate audio switcher, the projector can be used to select between two audio sources, routing them via a variable audio output to the room amplification system.

• Picture freeze function

  Picture Freeze is useful during presentations, enabling the user to look at other material on their PC's screen without the viewing audience being aware. Freeze the current image, and users can use their PC independently of the display from the projector.

• Digital zoom

  Digital Zoomallows you to enlarge a selected area of a computer sourced image you are displaying - up to four times.

• Off and go

  At the end of a presentation, you can turn off the power supply to the projector immediately, avoiding a 'power down' cycle.

• Direct power On/Off

  With this function, there is no need to go through 'Standby' mode when powering up the projector. The projector can be set to activate as soon as power is applied.

• Filter cleaning at the same time as lamp replacement

  The filter only needs to be cleaned when a new lamp is fitted, potentially halving disruption due to maintenance.

• Web control and monitoring / E-mail report

  A built-in Web Browser allows the user or AV manager to check a projector status remotely. Power ON/STANDBY, Input / output, Lamp usage (hours) can be controlled. An E-mail address can also be set to notify lamp exchange/replacement or any unexpected problems.

Specifications