Description
The D-Link 5000 Series data center switches are a series of high-performance switches that feature high port density, routing, and ultra-low latency, designed to be deployed as Top-of-Rack (ToR) or leaf-spine switches in data center applications. Combined with ONIE support and increased cost-efficiency, the 5000 Series forms a flexible long-term solution for managing and expanding data center infrastructures in a Software-defined Networking (SDN) environment.
-
Open networking support
The 5000 Series switches support open networking, providing IT professionals with innovative third-party operating systems and software options. This lowers costs by separating software from hardware and increases network agility and flexibility. With support for standards-based tools and standards-based applications, open networking simplifies scalability and future-proofs the network. -
High availability and reliability
The 5000 Series switches feature a modular fan and power supply design for high-availability architecture. The hot-swappable design means that fans and power supplies can be replaced without affecting switch operation. Load sharing enables both power supplies to evenly distribute load to increase reliability and lifetime. Meanwhile, 1+1 redundancy minimizes downtime in case of a single power supply failure. -
Cost-efficient solution
Compared to traditional switches, the 5000 Series offer a more cost-efficient solution through a lower initial purchasing cost combined with a reduced long term Total Cost of Ownership (TCO). The 5000 Series switches feature front-to-back and back-to-front airflow which optimizes air circulation inside the rack and facilitates the building of energy-efficient data centers by separating the hot and cold aisles. The switches also feature built-in smart fans; internal heat sensors monitor and detect temperature changes, and react accordingly by utilizing different fan speeds for different temperatures. At lower temperatures, the fans will run more slowly, reducing the switch's power consumption and noise.
Specifications
Summary
- Product Description
- D-Link DXS 5000-54S/SI - switch - 48 ports - rack-mountable
- Device Type
- Switch - 48 ports
- Enclosure Type
- Back to front airflow rack-mountable 1U
- Subtype
- 10 Gigabit Ethernet
- Ports
- 48 x 10 Gigabit SFP+ + 6 x 40 Gigabit QSFP+
- Performance
- Switching capacity: 1440 Gbps , Forwarding rate: 1071 Mpps
- MAC Address Table Size
- 288K entries
- Jumbo Frame Support
- 9KB
- Routing Protocol
- BGP, IGMPv2, IGMP, OSPFv2, IGMPv3, OSPFv3, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), MLDv2, MLD, VRRPv2, Bidirectional Forwarding Detection (BFD)
- Remote Management Protocol
- RMON 1, RMON 2, SNMP, RMON 3, RMON 9, Telnet, CLI, DHCP
- Features
- ARP support, IGMP snooping, port mirroring, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Virtual Route Redundancy Protocol (VRRP) support, Data Center Bridging Exchange (DCBX) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), SSH support, MLD snooping, reset button, Equal-Cost Multipath (ECMP), Remote Switch Port Analyzer (RSPAN), 12MB packet buffer, Class of Service (CoS), Type of Service (ToS), DiffServ Code Point (DSCP) support, 4 fans, Bridge protocol data unit (BPDU), ICMP Router Discovery Protocol (IRDP), Virtual Extensible LAN (VXLAN), Authentication, Authorization and Accounting (AAA), Root Guard, Loop Guard, flow mirroring, VLAN mirroring, Weighted Deficit Round Robin (WDRR), Top-of-Rack (ToR), BPDU Filter, loopback detection, BPDU Guard
- Compliant Standards
- IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau
- Power
- AC 120/230 V (50/60 Hz)
- Power Redundancy
- Yes
- Dimensions (WxDxH)
- 44 cm x 40.6 cm x 4.4 cm
- Weight
- 9 kg
- System Requirements
- No operating system
- Manufacturer Warranty
- Limited lifetime warranty
Detailed Specification
General
- Device Type
- Switch - 48 ports
- Enclosure Type
- Back to front airflow rack-mountable 1U
- Subtype
- 10 Gigabit Ethernet
- Ports
- 48 x 10 Gigabit SFP+ + 6 x 40 Gigabit QSFP+
- Performance
- Switching capacity: 1440 Gbps , Forwarding rate: 1071 Mpps
- MAC Address Table Size
- 288K entries
- Jumbo Frame Support
- 9KB
- Routing Protocol
- BGP, IGMPv2, IGMP, OSPFv2, IGMPv3, OSPFv3, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), MLDv2, MLD, VRRPv2, Bidirectional Forwarding Detection (BFD)
- Remote Management Protocol
- RMON 1, RMON 2, SNMP, RMON 3, RMON 9, Telnet, CLI, DHCP
- Authentication Method
- RADIUS, TACACS+
- Features
- ARP support, IGMP snooping, port mirroring, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Virtual Route Redundancy Protocol (VRRP) support, Data Center Bridging Exchange (DCBX) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), SSH support, MLD snooping, reset button, Equal-Cost Multipath (ECMP), Remote Switch Port Analyzer (RSPAN), 12MB packet buffer, Class of Service (CoS), Type of Service (ToS), DiffServ Code Point (DSCP) support, 4 fans, Bridge protocol data unit (BPDU), ICMP Router Discovery Protocol (IRDP), Virtual Extensible LAN (VXLAN), Authentication, Authorization and Accounting (AAA), Root Guard, Loop Guard, flow mirroring, VLAN mirroring, Weighted Deficit Round Robin (WDRR), Top-of-Rack (ToR), BPDU Filter, loopback detection, BPDU Guard
- Compliant Standards
- IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau
- Processor
- X Intel: 2.4 GHz
- RAM
- 8 GB DDR3 SDRAM
- Built-in Devices
- 64 GB SSD
- Status Indicators
- Status
Expansion / Connectivity
- Interfaces
- 48 x 10GBase-X SFP+ , 6 x 40GBase-X QSFP+ , 1 x console mini-USB , 1 x management (Gigabit LAN) RJ-45 , 1 x USB 2.0 Type A
Power
- Power Device
- Internal power supply - hot-plug
- Installed Qty
- 2
- Max Supported Qty
- 2
- Power Redundancy
- Yes
- Power Redundancy Scheme
- 1+1
- Power Provided
- 550 Watt
- Voltage Required
- AC 120/230 V (50/60 Hz)
- Power Consumption Operational
- 295 Watt
Miscellaneous
- MTBF
- 205,000 hours
- Compliant Standards
- BSMI, CB, CCC, FCC, cULus
Software / System Requirements
- Software Included
- Open Network Install Environment
- OS Required
- No operating system
Dimensions & Weight
- Width
- 44 cm
- Depth
- 40.6 cm
- Height
- 4.4 cm
- Weight
- 9 kg
Manufacturer Warranty
- Service & Support
- Limited warranty - lifetime
Environmental Parameters
- Min Operating Temperature
- 0 °C
- Max Operating Temperature
- 45 °C
- Humidity Range Operating
- 5 - 95%
- Min Storage Temperature
- -40 °C
- Max Storage Temperature
- 70 °C
- Humidity Range Storage
- 5 - 95%
